Description

A flocculant powder for the Slurrex filtration system. Added to the slurry water before filtering, it binds the finest particles together so the filter bag can capture them — so even hard-to-filter slurry water, such as water from self-levelling floor compounds, drains quickly and runs clear.

Features:

• Binds fine and colloidal particles that a filter bag alone cannot capture
• Makes hard-to-filter slurry water drain faster and run clearer
• Small dose per use — low cost per job
• Not classified as a hazardous substance or mixture (CLP)
• Not dangerous goods under transport regulations (ADR) – ships as a standard parcel
• Long shelf life: up to 24 months when stored dry
• Net weight: ~70 g per bottle

Directions:

• Add approx. 4–6 g of Slurrex Boost per 10 L of slurry water and mix before filtering. Then pour the water into the Slurrex filter bag and let it drain as usual.
• Overdosing weakens floc formation – add a little at a time.

Important:

• For construction use only. Not for drinking water.
• Store dry, tightly closed and out of reach of children.
• Wet powder is very slippery — clean up spills immediately.
• Handle and dispose of according to the Safety Data Sheet (SDS) and local waste regulations.
• For industrial and professional use only.
• Safety data sheet available on request.
• Do not release into waterways.

Sold separately. Also included in the Slurrex Starter Pack.

Reuse filtered water only where appropriate. Before discharge to a sewer or other disposal, consider the water’s other constituents, potentially high pH, and applicable local and site-specific requirements. Do not release untreated or overdosed slurry water into natural waters.

Packed in Finland.

For business and professional use only